SKU: DBA2511S
- Sold as pair
- Diameter (mm): 260
- Stud Holes 5
AU $266.00 GST incl
We are now the authorised sole Spoon Sports distributor for AU/NZ, large range of products in stock!
*A $6 monthly account fee applies
(only payable if a balance is owing) See full Ts & Cs
Paragon Performance 2-piece Rotor offers superior braking and cooling efficiency optimized for track and race applications. Features greater thermal capacity and increased resistance to cracking under harsh track condition.
Made of CM-250 special formulated high carbon alloy cast iron, it allows for an optimal bite, thermal characteristics, high-temperature strength and durability. Rotor rings are heat treated to release stress in the rotor to avoid deformation and vibration then turned by state-of-the-art CBN surface machining to ensure better break-in with new brake pads.
Vibration is reduced as the rotor lateral run-out is kept within 0.03mm and well-balanced: variations are kept within 2 grams. All rotors went through rigorous quality control procedures and inspections to ensure the rotors are fit for their purposes. A slotted rotor improves braking consistency by maintaining a clean contact surface and dissipate heat generated and gases released when the pads come into contact with the rotors. Slotted rotors have a superior advantage over blank rotors in wet or raining conditions by preventing water films to form between the brake pad and rotor surface. Weighing less than most O.E. rotors while maintaining proper thermal capacity, our 2-piece rotors improves overall handling by saving unsprung mass.
Aluminum hats are CNC machined from lightweight 6061-T6 aerospace grade aluminum for high strength and durability under extreme track conditions, then black hard coat/hard anodized to increase resistance to wear and corrosion. Mil-spec Type III anodized hats will not discolor under extreme heat, and are harder and more wear/scratch resistant. Unnecessary materials are taken out from the aluminum hats for maximum weight savings while maintaining proper structural integrity.
*Black hard coat and hard coat anodized hats are the same in terms of performance and durability.
Direct replacement of: OEM Honda part # 42510-TGH-A00 (42510TGHA00)
Includes:
Application:
Extra/replacement hardware is available for purchase. We recommend using new hardware when replacing rotors to ensure the rotor ring is attached to the aluminum hat properly. Please refer to our Rotor Assembly Instructions for torque specs and detailed instructions.
(PARAGON-FKFL-RR-305)
SKU | PARAGON-FKFL-RR-305 |
Brand | PARAGON |
Shipping Weight | 20.0000kg |
Shipping Width | 0.500m |
Shipping Height | 0.100m |
Shipping Length | 0.500m |
Shipping Cubic | 0.025000000m3 |
Help other JDMyard Pty Ltd users shop smarter by writing reviews for products you have purchased.
SKU: DBA2511S
AU $266.00 GST incl
SKU: DBA483
AU $179.00 GST incl
SKU: A1-116
AU $1,795.00 GST incl
SKU: DBA2523
AU $208.00 GST incl
SKU: DBA2509
AU $193.00 GST incl
Welcome to our website. If you continue to browse and use this website, you are agreeing to comply with and be bound by the following terms and conditions of use, which together with our privacy policy govern JDMyard Pty Ltd’s relationship with you in relation to this website. If you disagree with any part of these terms and conditions, please do not use our website.
The term ‘JDMyard Pty Ltd’ or ‘us’ or ‘we’ refers to the owner of the website whose registered office is Unit 25, 317-321 Woodpark Road, SMITHFIELD, NSW, 2164, AU. Our ABN is 53131333312. The term ‘you’ refers to the user or viewer of our website.
The use of this website is subject to the following terms of use:
At Jdmyard Pty Ltd we do things a little differently. For starters, we take a great deal of care when we handle your personal information and we do so in line with the 13 Australian Privacy Principles (APPs) that can be found at the OAIC website (www.oaic.gov.au).
Jdmyard Pty Ltd has developed a simplified and extended policy to help you better understand how your data is stored and used by us, as well as the purpose for which it is used and why. This simplified version will give you a quick snapshot, or if you're up for a thorough read, please view our complete Privacy Policy here.
This simplified Privacy Policy applies to personal information collected by Jdmyard Pty Ltd (jdmyard.neto.com.au).
Both the simplified privacy policy and the extended privacy policy were last updated on 18/08/2015.
At Jdmyard Pty Ltd we accept payments via the following third parties:
Paypal
Afterpay
Braintree
Zip Money
All payment information that is entered on our website is sent to these third parties securely and with industry standard encryption. No payment information is retained on our systems and is all managed by these third parties. Please see their websites above for more information on how they handle your personal and payment information.
Personal information is information that may identify you or by which your identity may be reasonably determined. Such personal information may include your name, address, other contact details, your date of birth, or any other information that may be provided by you in order to access or make use of our services at www.jdmyard.com.au. In this privacy policy, 'personal information' has the same meaning as defined by section 6 of the Privacy Act 1988 ('Privacy Act').
The main way we collect personal information is through you directly or through your authorised representative. That is, when you visit us at www.jdmyard.com.au and submit your personal information or request your personal information to be used (i.e. by subscribing to an email newsletter).
We sometimes collect personal information from a third party or from a publicly available source, but only if:
Your personal information may be collected through the following services that are used on our website:
We only collect personal information for purposes which are directly related to our functions or activities under the Privacy Act, the Freedom of Information Act 1982 (FOI Act), and only when it is necessary for or directly related to such purposes.
We only use personal information for the purposes for which we collected it – purposes which are directly related to one of our functions or activities that on the whole create a better user experience for you at www.jdmyard.com.au.
We do not give personal information about an individual to any government agencies, private sector organisations or anyone else unless one of the following applies:
We take steps to protect the personal information we hold against loss, unauthorised access, use, modification or disclosure, and against other misuse.
When the personal information that we collect is no longer required, we destroy or delete it in a secure manner.
Yes, you can access the personal information that we hold about you, and you can ask us to correct the personal information we hold about you. For more information, see our extended Privacy Policy or alternatively you can contact us directly using the contact details below.
Jdmyard Pty Ltd is bound by the Australian Privacy Principles in the Privacy Act. We care about our users and do everything we can to adhere to the 13 Australian Privacy Principles as per the OAIC guidelines.
For further information contact us at support@jdmyard.com.au or alternatively you can write to us at jdmyard Pty Ltd, 25/317-321 Woodpark Rd Smithfield NSW 2164.
Simple instalment plans available instantly at checkout
Use your existing debit or credit card
No long forms, instant approval online
Pay fortnightly, enjoy your purchase straight away!
All you need is:
1) A payment card; 2) To be over 18 years of age; 3) Resident of country offering Afterpay
To see Afterpay's complete terms, visit https://www.afterpay.com/terms
© 2024 Afterpay